The World’s First
Independent 4-Head 3D Printer Powered by Linear Motors
The World’s First
Independent 4-Head 3D Printer Powered by Linear Motors
Early-bird launch offers
Product updates before public release
Exclusive community access
Independent Print Heads
Independent
PrintHeads
Toolhead Change
Purge Waste
Creator: @Morlan
Closed-Loop Motion Precision
Stable Operation
Stable Operation
Closed-Loop Motion Precision
The Independent 4-Head Revolution
The Independent
4-Head Revolution
Meet LightMake L4, An Unprecedented Productivity Beast.
Meet LightMake L4,
An Unprecedented Productivity Beast.
Toolhead Change in Just 1-Second
Toolhead Change in
Just 1-Second
Even the fastest 3D printers still need more than 5 seconds for every single color change. With 4 independent heads always loaded and ready, the L4 virtually eliminates the massive purge waste. Through intelligent real-time coordination and pre-heating of the toolheads, the L4 reduces tool changing time to just 1 second, saving over 79% time on multi-color printing.
*1s Tool Change: Refers to the mechanical switch time from when one toolhead stops printing to when the next takes over.
*Save over 79% Time: Calculated based on internal testing using a 4-color fox model. Actual results will vary depending on model geometry and color complexity.
One L4, More Than Four Printers
One L4, More Than Four Printers
Skip the wait on batch prints. 4 independent toolheads deliver four identical models simultaneously. Also guarantees true fault isolation. If one model fails during a batch run, the remaining three continue printing flawlessly. Quadruple your output, maximize your workspace, and eliminate full plate print anxiety.
Ditch the slow, sequential batch printing. The L4’s four independent heads operate simultaneously to quadruple your output. Whether you are printing four unique gifts for family and friends in a single go, testing four color iterations for your design prototypes, or multiplying your print farm's delivery efficiency within a smaller footprint, the L4 turns complex workflows into effortless productivity.
Stop bleeding profits on purge waste. Achieve zero purge waste. With four independent heads serving each color through dedicated nozzles, the L4 swapped massive, wasteful purge for a minimal prime tower. Every single gram you load builds your masterpiece.
Uncompromised Massive Volume.
Print it whole. The L4 massive chamber fits a standard basketball with room to spare. It is your ultimate canvas to bring the wildest designs to life with zero slicing and zero gluing.
Seamless Mega Prints. Print a massive moon lamp in one go. No glued seams to ruin the glow.
Full Size. Zero Waste. Craft a vibrant 1:1 cosplay helmet. 4 independent toolheads eliminate purge waste. Keep your filament in the model and out of the trash.
Multiply your output instantly. Perfect for mass-producing mechanical parts or retail products simultaneously.
Seamless Material Fusion
Seamless Material Fusion
Print up to four materials in one go to simplify your workflow. By seamlessly combining rigid, flexible, and specialized support filaments in a single continuous print, removing post-processing and manual assembly from your timeline. This unconstrained freedom expands your design possibilities.
Linear Motors, Ending the Belt Era
Linear Motors,
Ending the Belt Era
Ditch the rubber belts and pulleys. Powered by 8 sets of XY linear motors, the L4 delivers a revolutionary leap in stability, precision, speed, and durability.
Direct-Drive Kinetics
Direct-Drive Kinetics
Experience the raw power of direct-drive linear motors. With zero transmission loss, every ounce of energy translates into instant acceleration and ultra-crisp stops, virtually eliminating ringing and ghosting.
*Note: The linear motor’s true physical limit is vastly higher. We deliberately tuned the max print speed to 500 mm/s and acceleration to 20 m/s² to ensure stable, high-quality output.
Linear motors enable true closed-loop control. The system actively monitors and adjusts the motor's position in real-time, delivering ±1μm motion accuracy and eliminating layer shifts. Whether you are printing intricate mechanical threads or large multi-part assemblies, experience the satisfaction of a seamless, perfect fit right off the build plate.
Non-contact magnetic propulsion eliminates mechanical friction and wear, delivering a 10X longer lifespan compared to traditional belt-driven setups. This architectural leap ensures over 50,000 hours of degradation-free performance without the need for constant tensioning or frequent replacements.
Engineered for Your Ambition
Whether you seek ultimate ROI, limitless creativity, or assembly-ready prototypes, the L4 is engineered for you.
Unleash your full creative potential. Stop letting massive purge towers, agonizingly slow color swaps, and ugly surface ringing ruin your masterpiece. Let your imagination flow without limits.
Full-scale prototyping with zero post-processing. Print large, multi-color models in a single continuous job. Skip the gluing and manual adjustments, and keep your workflow strictly focused on design.
Sharpen your competitive edge. Break through the limitations of slow output, frequent maintenance, and massive material waste. Shatter these traditional bottlenecks and achieve maximum ROI from a smart investment.
Perfected from the Ground Up
Maximize your first-layer success rate. A 5mm independent toolhead lifting mechanism pairs with micron-level compensation to drastically improve adhesion and virtually eliminate warping. Secure a uniform, consistently reliable first layer every time.
Traditional mechanical calibration relies on theoretical offsets, ignoring real-world machining tolerances and extrusion drift. L4 solves this by scanning the actual print. Using optical sensors to capture the precise X/Y coordinates of the deposited material, it achieves a 30μm absolute alignment for zero-gap multi-material transitions.
Precision Meets Purity
Harness ±1µm motion precision. The advanced linear motor maintains tight tolerances even at high speeds, ensuring that all printed components interlock seamlessly. Deliver complex, ready-to-use assemblies with near-zero manual sanding.
Eliminate color bleeding entirely. The Independent 4-Head system utilizes absolute physical isolation, ensuring overlapping colors and materials never interfere with one another. Deliver incredibly crisp transitions that faithfully capture your design.
Dual HD cameras with AI detection. Instantly halts failures. Total unattended security.
Connect one L4 to automatically wake and network adjacent units. Eliminate repetitive setups and scale your production instantly.
*Active pairing range is limited to 8 meters.
Automatically read official filament data to adapt print parameters on the fly for a true plug-and-play experience.
Master your entire workflow instantly through a massive, full-color interface.
Your workflow, your choice. Choose the L4 for seamless multi-color mastery, or the LightMake L1 if your work demands pure, expansive scale. Both models share the same elite core, engineered to deliver uncompromising performance for your specific projects.
LightMake L4
LightMake L1
Drive System
Toolheads
Linear Motor Sets
Max Print Colors
Maximum Printing Size - Single Color
Maximum Printing Size - Multi-Color
Maximum Tool Head Temperature
Maximum Heat Bed Temperature
Maximum Travel Speed
Maximum Print Speed
Maximum Print Acceleration
Screen
Nozzle
Storage
Auxiliary Model Cooling
Camera
Suitable Materials
Printable Materials
Filament Change System
OTA
Early-bird launch offers
Product updates before public release
Exclusive community access
